Cisco Nexus 9372PX Hardware Installation Manual page 28

Installing the Switch
a) Holding the switch with both hands, position the two rear rack-mount brackets on the switch between the rack or
cabinet posts that do not have slider rails attached to them (see the following figure).
Figure 6: Sliding the Chassis into the Rack
1 Align the two rear rack-mount bracket guides with
the slider rails installed in the rack.
2 Slide the rack-mount guides onto the slider rails until
the front rack-mount brackets come in contact with
the front rack-mount rails.
b) Align the two rear rack-mount guides on either side of the switch with the slider rails installed in the rack. Slide the
rack-mount guides onto the slider rails, and then gently slide the switch all the way into the rack until the front
rack-mount brackets come in contact with two rack or cabinet posts.
Cisco Nexus 9372PX and 9372PX-E NX-OS-Mode Switches Hardware Installation Guide
18
3 Front-mount brackets.
4 Mounting rails on rack or cabinet posts.
Installing the Switch Chassis