Terraillon TFA15 User Manual page 6

Electronic bathroom scale body fat analyzer
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 5
TFA15 mnl BAT
16/12/03
ELECTRONIC BATHROOM SCALE - BODY FAT ANALYZER
9. Step onto the scale in your bare feet. Do not move
during weighing. Your weight will be displayed for 3
seconds.
10. Then the scale will begin calculating your rate of body
fat. The screen will display rapidly blinking zeros.
11. This phase ends with a beep. The percentage of fat,
the weight, the age and the sex appear for 4 seconds.
The scale switches off automatically.
To use your memory:
1. Press the [ ON/OFF ] button to access the impedance
measurement mode.
2. Press the " MEMORY" [ MEM. ] button to select the
memory mode and obtain a data display.
3. Press the [
/
] buttons to select the memory where
your data is stored. If the selected memory is empty,
no data will appear; if it is full, the information it
contains will be displayed.
[
4. Press the " ENTER"
memory. The scale will emit a beep.
5. Then follow instructions contained in steps 9 - 11 above.
2) Weighing Mode
1. Step onto the platform.
2. Do not move during weighing.
3. Your weight will be displayed on the screen as follows:
(56 kg 800 g)
17:24
Page 7
TFA15 - TFA 20 - TFA 25
]
to validate your choice of
56.8
SPECIAL DISPLAYS
Display
In the case of:
Err0
Incorrect initialisation: begin again as
explained above.
Err1
Unstable weight: begin again.
Err2
Overload: remove weight immediately.
Err3
Body impedance exceeds the limit
(100 ohm - 1kohm): begin again.
Err4
Percentage of body fat above
the 5%-50% bracket: begin again.
Batt
Battery failure: replace it.
OTHER REMARKS
1. The rate of body fat recommended by health care
professionals is :
Men: between 10% and 18%
Women: between 20% and 29%
2. Consult your doctor if your rate of body fat is below
or above normal.
3. Your percentage of body fat may vary from one day
to the next or depending on the time of day.
4. It is recommended to weight oneself regularly and
always under the same conditions.
WARRANTY
This impedance scale is guaranteed for 2 years against
defects in materials or manufacturing. During this period,
any such defects will be repaired free of charge (proof of
purchase must be shown in the case of a complaint under
warranty).
The warranty does not cover damage resulting from impro-
per use or negligence. In the event of a claim, first contact
the shop where you purchased your scale.
7

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tfa 20Tfa 25

Table of Contents