Advertisement
I N S T R U C T I O N
Plasma Presenters Cart
(PPC-2000)
The Plasma Presenters Cart (PPC) is designed to assist
the presenter in showrooms, boardrooms, and trade
show exhibits. The PPC provides agile mobility for
screens weighing up to 200 pounds while furnishing safe,
stable support.
The attractive cart base is constructed of rugged 2.5"
diameter steel tubing with optional smoked acrylic acces-
sory shelves. Access holes, to conceal unsightly equip-
ment cords or cables, are provided at several locations in
the base. The standard two 4" twin wheel casters and
two locking casters make movement easy yet prevent
accidental movement of the screen.
The universal mounting plate accepts all Chief PSB
mounting brackets. The 2" incremental height adjustment
facilitates optimum viewing for most settings.
BEFORE YOU BEGIN
• CAUTION: To prevent damage to the Plasma Presenters Cart, which could affect or void the Factory war-
ranty, thoroughly study all instructions and illustrations before you begin to install or operate the unit.
• The maximum weight to be installed on the PPC is 200 pounds (90.7 Kg).
Chief Manufacturing, a division of Milestone AV Technologies
8401 Eagle Creek Parkway, Savage, MN 55378
P: 800.582.6480 / 952.894.6280 F: 877.894.6918 / 952.894.6918
M A N U A L
2008 Milestone AV Technologies
8809-000001 Rev. I
www.chiefmfg.com
10/08
Advertisement
Table of Contents
Related Manuals for CHIEF PPC-2000
Summary of Contents for CHIEF PPC-2000
- Page 1 The standard two 4” twin wheel casters and two locking casters make movement easy yet prevent accidental movement of the screen. The universal mounting plate accepts all Chief PSB mounting brackets. The 2” incremental height adjustment facilitates optimum viewing for most settings.
-
Page 2: Table Of Contents
Instruction Manual Plasma Presenters Cart IMPORTANT WARNINGS and CAUTIONS! WARNING: A WARNING alerts you to the possibility of serious injury or death if you do not follow the instructions. CAUTION: A CAUTION alerts you to the possibility of damage or destruction of equipment if you do not follow the corre- sponding instructions. -
Page 3: Inspect Parts Before Assembly
Instruction Manual Plasma Presenters Cart INSPECT PARTS BEFORE ASSEMBLY Inspect The Cart 1. Carefully inspect the cart for shipping damage. If any damage is apparent, call your carrier claims agent and do not continue with the assembly procedure until the carrier has reviewed the damage. -
Page 4: Assemble Cart
Instruction Manual Plasma Presenters Cart ASSEMBLE CART Numbers in ( ) refer to parts shown in Figure 1 and Figure 2. Assemble cart as follows: Casters 1. Place base (10) upside down and thread two locking casters and two regular casters (60) into base (see Figure 3). -
Page 5: Mount Flat Panel Display On Cart
Instruction Manual Plasma Presenters Cart MOUNT PLASMA DISPLAY ON CART 1. Install PSB bracket (not included) on plasma display according to instructions supplied with bracket. Remove pin and nut and WARNING: Do not attempt to hang the plasma display onto move to lower holes the cart with one person. -
Page 6: Remove Display From Mount
Instruction Manual Plasma Presenters Cart REMOVING DISPLAY FROM MOUNT Remove bolt or padlock from faceplate (if used). NOTE: The pin may have been used as a more permanent locking device. If so, remove nut and pin and move from the lower holes to the upper holes. Pull back on flag on upper mounting hole and press pin down into "Open"...
Need help?
Do you have a question about the PPC-2000 and is the answer not in the manual?
Questions and answers