Before Using For The First Time; Selecting Extraction Mode Or Recirculation Mode; Setting Up Miele@Home - Miele DA 2668 Operating And Installation Instructions

Selecting extraction mode or
recirculation mode
The rangehood can be operated with
either extraction mode or recirculation
mode. The power of the fan is
adapted to suit the selected mode of
operation. The rangehood is set up at
the factory for recirculation mode. It
has to be re-set for extraction mode.
To re-set it for extraction mode the
operating hours counter for the
charcoal filter(s) has to be deactivated.
 Switch off the fan and the lighting.
 Press the  control and the operating
hours control  at the same time.
The charcoal filter symbol  and one of
the fan power levels will flash.
 Press and hold the  control until the
B indicator lights up.
 Confirm your selection by pressing
the operating hours control .
All the indicator lights will go out.
Extraction mode has now been set.
If you do not confirm your selection
within 4 minutes, the rangehood will
automatically revert to the previous
setting.

Before using for the first time

Setting up Miele@home

(WiFi is only available in selected
countries)
Prerequisite:
– Home Wi-Fi network
Your rangehood is equipped with an
integrated Wi-Fi module. The
rangehood can be connected to the
household Wi-Fi network.
You will then be able to operate the
rangehood via the Miele@mobile App.
If your Miele cooktop is connected to a
home Wi-Fi network, you can control
the rangehood automatically via the
Con@ctivity function.
Before installing the rangehood in its
final location, ensure that the signal
of your Wi-Fi network is strong
enough.
Please note that you cannot set up a
Wi-Fi connection at the same time as
the radio frequency Con@activity 2.0
system.
17