Miele DA 289-4 Operating And Installation Manual
Hide thumbs
Also See for DA 289-4:
- Operating and installation manual (40 pages) ,
- Operating and installation instructions (36 pages) ,
- Install manual (1 page)
Related Manuals for Miele DA 289-4
Summary of Contents for Miele DA 289-4
- Page 1 Operating and Installation Instructions Ventilation System DA 289-4 en - US To prevent accidents and appliance damage, read these instructions before installation or use. M.-Nr. 07 782 280...
-
Page 2: Table Of Contents
Contents IMPORTANT SAFETY INSTRUCTIONS Functional description Guide to the Ventilation System Operation Turning on the fan ..........10 Selecting the power level. -
Page 3: Important Safety Instructions
Use this appliance only in the manner intended by the manufacturer. Read these instructions carefully If you have questions, contact Miele. before installing or using the b) Before servicing or cleaning the Ventilation System. appliance, switch power off at the... - Page 4 IMPORTANT SAFETY INSTRUCTIONS d) Before connecting the appliance to the power supply make sure that the ,WARNING voltage and frequency listed on the data plate correspond with the TO REDUCE THE RISK OF A household electrical supply. COOKTOP GREASE FIRE: This data must correspond to prevent appliance damage.
- Page 5 IMPORTANT SAFETY INSTRUCTIONS ,WARNING Do not allow children to play with or operate the appliance or its controls. TO REDUCE THE RISK OF Supervise its use by the elderly or INJURY TO PERSONS IN THE infirm. EVENT OF A COOKTOP Always turn on the hood when using GREASE FIRE, OBSERVE THE the cooktop to prevent damage from...
- Page 6 IMPORTANT SAFETY INSTRUCTIONS Installation g) Do not install this hood over cooktops that burn solid fuel. ,WARNING h) Provided a larger distance is not TO REDUCE THE RISK OF given by the manufacturer of the FIRE, ELECTRIC SHOCK, OR cooktop, follow the minimum safety distances between a cooktop and the INJURY TO PERSONS, bottom of the hood given in the...
-
Page 7: Functional Description
Functional description The ventilation hood works by air extraction. The air is drawn in and cleaned by the grease filter and directed outside. The hood comes equipped with a non-return flap. This flap automatically closes when the hood is turned off so that no exchange of outside air and room air can occur. -
Page 8: Guide To The Ventilation System
Guide to the Ventilation System... - Page 9 Guide to the Ventilation System Chimney extension Light button This button dims the light or turns it on Chimney and off. The lighting can be used independently Canopy of the fan. Control panel On/Off button Overhead lighting Fan power selection Grease filter Four fan speed selection Delayed Shut Down...
-
Page 10: Operation
Operation Turning on the fan Automatically switching back the intensive power level The intensive level "4" can be programmed to automatically switch back to level "3" after 10 minutes. ^ Press the On/Off button. ^ Turn the fan and the lights off. ^ Press and hold the "Delay Shut down"... - Page 11 Operation Fan performance The maximum air flow capacity is 625 cfm. Factors such as narrow duct diameter and bends will affect this If the power level indicators "1" and "4" value. flash the automatic switch back is not Level 1 operates at 40% capacity activated.
-
Page 12: Delayed Shut Down
Operation Delayed Shut Down Turning off the fan If odors or smoke remain in the kitchen after cooking has been completed, the Delayed Shut Down feature can be selected to allow the hood to continue ^ Press the On/Off button to turn the running for either 5 or 15 minutes. -
Page 13: Turning The Lighting On/Off
Operation Turning the lighting on/off Dimming the lighting The overhead lighting can be turned on The brightness of the lighting can be and off independently of the fan. adjusted. ^ While the lighting is turned on, press the light button. The lighting will dim until the button is released. -
Page 14: Grease Filter Timer
Operation Grease filter timer Checking the grease filter timer A timer monitors the hours of fan To check the percentage of time operation. The indicator for the grease already used: filter will light after 30 hours of operation. The grease filter and air intake panel must then be cleaned. - Page 15 Operation Reprogramming the grease filter timer The grease filter timer is preset to 30 hours. This time can be lengthened or The indicator for the grease filter and shortened to 20, 30, 40 or 50 hours. one of the "–/+" indicators will flash. –...
- Page 16 Operation If the indicator light for the grease filter turns blue during operation, this indicates that an unrequired electronic has been activated. To deactivate: – With the fan turned off, press the "+" button and grease filter button at the same time.
-
Page 17: Cleaning And Care
Cleaning and care ,WARNING ^ Glass surfaces can be cleaned using glass cleaner. TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR Avoid: INJURY TO PERSONS, – cleaning agents containing soda, OBSERVE THE FOLLOWING: acids or chlorides, – abrasive cleaning agents Before cleaning or servicing the e.g. -
Page 18: Grease Filter And Air Intake Panel
Cleaning and care Grease filter and air intake Removing the air intake panel panel The reusable metal grease filter removes solid particles from the vented kitchen air (grease, dust, etc). The grease filter and the air intake panel should be cleaned every 3 - 4 weeks or whenever the grease filter ^ To remove the air intake panel gently indicator lights. - Page 19 Use a wash program with a max. ^ Hook the air intake panel on the temperature of 150°F (65°C). In a Miele dishwasher use the "Normal" latches and push a little to the left. program. Push it toward the unit so that it clicks Use the recommended amount of in place.
-
Page 20: Changing The Light Bulb
Replacement bulbs may be ordered from Miele’s Technical Service Do not touch the bulb surface. Department. Fingerprints or body oils deposited See the phone numbers on the back on the bulb will decrease its life. -
Page 21: After Sales Service
Miele’s Service department, Extended Service Contracts offered by other providers for Miele products will not be recognized by Miele. Our goal is to prevent unauthorized (and untrained) service personnel from working on your Miele products, possibly doing further damage to them, you and/or your home. -
Page 23: Installation Instructions
Installation Instructions Read these instructions and the "Important Safety Instructions" before installing this ventilation system. The installation steps are described in the enclosed "Installation Diagram". Leave these instructions with the appliance for the consumer/user. Information is subject to change. Please refer to our website to obtain the most current product specification, technical &... -
Page 25: Caring For The Environment
Caring for the environment Disposal of packing material Disposal of an old appliance The cardboard box and packing Old appliances may contain materials materials protect the appliance during that can be recycled. Please contact shipping. They have been designed to your local recycling center about the be biodegradable and recyclable. -
Page 26: Appliance Dimensions
Appliance dimensions... -
Page 27: Appliance Dimensions
Appliance dimensions 1) and 2) Distance between cooktop and Cut out area in wall or ceiling for hood (S) entrance of 6" (150 mm) ^ To observe the safety distance and ductwork or 5" (125 mm) ductwork with ensure an optimum function and use a reducing collar. -
Page 28: Installation Accessories
Installation accessories... -
Page 29: Installation Accessories
Installation accessories 3 protective shields prevent scratches to the chimney during installation. 5 large headed screws 5 x 40 mm Upper retaining plate secures the for securing the retaining plates and the chimney extension. canopy. Middle retaining plate for additional (S8 wall anchors included in the stability of the chimney. -
Page 30: Plywood Backing
Plywood backing ^ Find the studs to the left and right of The majority of the weight of the the mounting location by tapping the installed ventilation system will be wall or using a stud finder. supported by the lower retaining ^ Mark a vertical cutting line along the plate. -
Page 31: Installation
Installation Protective film Dismantling The casing is covered with a protective If the hood needs to be disassembled, film to prevent scratching during follow the instructions on the transport. "Installation diagram" in the reverse order. ^ Peel off the film before installing the casing parts. -
Page 32: Air Extraction
Air extraction Exhaust ducting and connections WARNING Use smooth or flexible pipework made from approved non-flammable Danger of toxic fumes. materials for exhaust ducting. Gas cooking appliances release To achieve the most efficient air extraction and quietest noise levels, carbon monoxide that can be consider the following: harmful or fatal if inhaled. -
Page 33: Condensate Trap
Air extraction Condensate trap optional accessory In some cases, a condensate trap may also be required to collect and evaporate any condensate which may occur. This optional accessory is available for ducts 5" (125 mm) and 6" (150 mm) in diameter. –... -
Page 34: Electrical Connection
Frequency ....60 Hz licensed electrician or contact Miele’s Technical Service Department. Circuit rating....15 A... - Page 36 Alteration rights reserved / 2011 M.-Nr. 07 782 280 / 01 INFORMATION IS SUBJECT TO CHANGE. PLEASE REFER TO OUR WEBSITE TO OBTAIN THE MOST CURRENT PRODUCT SPECIFICATIONS, TECHNICAL & WARRANTY INFORMATION.