Miele DA 2668 Operating And Installation Instructions page 24

Before using for the first time
Installing the Con@ctivity 2.0 stick
 See the relevant installation
instructions provided with the
Con@ctivity 2.0 stick.
Activating the radio frequency
connection
The rangehood and the cooktop must
be installed and operational.
Radio frequency connection must be
activated on the rangehood and the
cooktop at the same time. Activation on
the rangehood is described below.
Activation on the cooktop is described
in the relevant operating and installation
instructions. Please refer to the
operating instructions before starting.
Activate the rangehood first, then the
cooktop.
24
Activating the rangehood
 The cooktop and rangehood must be
switched off.
 Press the run-on control  for
approx. 10 seconds until 1 lights up.
 Then press in turn:
– the  control,
– then the  control,
– then the lighting control .
The rangehood is now in signing on/off
mode.
If a radio frequency connection has not
yet been established, 2 and 3 will flash
at the same time.
If a radio frequency connection has
already been established, 2 and 3 will
light up constantly (Con@ctivity 2.0 is
already activated or a remote control is
signed on).