Blades & Cutting Heads - National 5600 Instruction Manual

BLADES & CUTTING HEADS
CUTTING HEADS
Swivel heads rotate to use the second sharp edge of the blade without having to remove the blade.
Swivel head allows blade to stay in contact with the floor.
7050-8RBH
7050-6
7050-12
7050-12RBH
TAPERED CUTTING HEAD SHANK BLADES
Designed for removing wood and the toughest removals. Blades are mounted at an angle to achieve the
optimum shear point for the best performance.
7075-11
7075-8
7077-11
TAPERED CUTTING HEAD SHANKS WITH CARBIDE TIPS
Works on wood and ceramic. Blades are mounted at an angle to achieve the optimum shear point for the
best performance. Nothing else performs like carbide when no other blade will work.
7076-11
7076-8
7078-11
7050-8
7050-10
7050-14
7050-14RBH
7050-27
73330
7077-8
7078-8
7050-6
7050-8
7050-10
7050-12
7050-14
7050-27
7050-8RBH
7050-12RBH
7050-14RBH
73330
7075-8
7075-11
7077-8
7077-11
7076-8
7076-11
7078-8
7078-11
Page 70
6'' CUTTING HEAD
8'' CUTTING HEAD
10'' CUTTING HEAD
12'' CUTTING HEAD
14'' CUTTING HEAD
27'' CUTTING HEAD
8'' RAZOR BLADE HEAD
12'' RAZOR BLADE HEAD
14'' RAZOR BLADE HEAD
5/16 X 2 PIN
Secures cutting head assemblies
2'' X 8'' TAPERED CUTTING
HEAD SHANK
2'' X 11'' TAPERED CUTTING
HEAD SHANK
3.5'' X 8'' TAPERED CUTTING
HEAD SHANK
3.5'' X 11'' TAPERED CUTTING
HEAD SHANK
2'' X 8'' TAPERED CUTTING
HEAD SHANK W/ CARBIDE TIP
2'' X 11'' TAPERED CUTTING
HEAD SHANK W/ CARBIDE TIP
3.5'' X 8'' TAPERED CUTTING
HEAD W/ CARBIDE TIP
3.5'' X 11'' TAPERED CUTTING
HEAD SHANK W/ CARBIDE TIP