Safety Instructions/ Precautions - National 5600 Instruction Manual

SAFETY INSTRUCTIONS/ PRECAUTIONS

Read and understand operators instruction manual and instructional video
before operating this equipment.
The 5600 Propane Ride-On has been equipped with a safety switch under the seat, which requires the
operator to be seated before the 5600 can be operated. Do not attempt the start-up procedure with out
being seated on the machine.
WARNING: Bypassing this or any other safety device may cause property damage and/or bodily injury.
Before carrying out maintenance or repair work:
•Let the engine and the exhaust system, cool down;
•Remove all traces of oil, combustible fuel or cleaning fluids from the scraper, its connections
and fittings in particular;
•Do not use any aggressive cleaning products;
•Be sure that all cleaning rags are fiber free;
•Retighten all loose fittings found during maintenance and repair work.
GASES, DUST, STEAM, SMOKE
Do not weld, flame cut or perform grinding work on the 5600 Propane Ride-On without written
authorization from the manufacturer. The danger of fire or explosion exists when work of this nature is
done. Begin maintenance work only when the machine is in Shut Down Mode (turned off).
SAFETY PRECAUTIONS (OPERATOR/PERSONNEL TRAINING)
Operating and maintenance personnel must verify availability of appropriate fire protection equipment, be
properly trained in the use of the equipment and know how to contact the Fire Department or Emergency
Medical Service if needed.
Page 12