Shut-Down Mode; Machine Storage - National 5600 Instruction Manual

OPERATING CONTROLS
N : I
OTE F MACHINE IS NOT RUNNING BUT THE KEY IS IN THE IGNITION AND IN ON POSITION
HOUR METER WILL CONTINUE TO RUN
SHUT DOWN MODE
Definition:
State or condition of the 5600 Propane Ride-On that minimizes the danger of mechanical, electrical,
pneumatic or hydraulic hazards.
P 5600 P
UTTING THE ROPANE
• Move the 5600 to level ground
• Turn off the ignition switch and remove the key
• DO NOT move hydraulic levers. The hydraulic system is the brake system. Moving levers could cause
machine to roll, causing damage to machine, property damage and/ or bodily injury
• Wait until motor has stopped completely
• Close propane tank valve (Figure A)
• Let the engine, exhaust system and hydraulic components cool down before performing maintenance
on the machine
WARNING
: Engine, exhaust system and hydraulic component temperatures could be in
excess of 200° F causing severe burns if touched.
Figure A

MACHINE STORAGE

• Follow Shut Down Mode procedure
• After engine has completely cooled down, disconnect propane line
• Remove negative terminal on battery
(SHUT DOWN PROCEDURE/ TURNED OFF)
R -O S D M
IDE N IN HUT OWN
Propane
Tank Valve
Page 21
:
ODE
,
THE