Removing And Fitting Filter Silencer Or Air Suction Branch - ABB TPL65-A32 Operation Manual

8.3
8.3
Removing the air suction
branch
Installing the air suction
branch
© Copyright 2014 ABB. All rights reserved.
Operation Manual / TPL65-A32 / -A33 / -A36 + TPL69-A32 / -A33
Disassembly and assembly
Removing and fitting filter silencer or air
suction branch
Removing and fitting filter silencer or air
suction branch
Disconnect all air lines in accordance with the engine builder's

instructions.
Dismantle the insulation where necessary.

Pass a lifting gear around the air suction branch. It is permissible to

pass the lifting gear through holes possibly provided in the ribs to
improve stability.
Unscrew the nuts (72027) and remove them together with the washers

(72018).
Remove the air suction branch and set it down to one side.

Fit the air suction branch in reverse order.

8
8.3 Page 81