ABB TPL65-A32 Operation Manual page 77

WARNING
© Copyright 2014 ABB. All rights reserved.
Operation Manual / TPL65-A32 / -A33 / -A36 + TPL69-A32 / -A33
Removal and installation
Remove the turbocharger
Ribs (1) not in the middle at the top:

Completely remove the bearing casing insulation (2) and place a sling

around the bearing casing.
Loosen the fixing screws at the foot.

Lift the turbocharger off the engine and set it down to one side.

Beware of tilting
If support for the turbocharger is not provided or is inadequate, the
turbocharger could tip over during installation or removal and cause a
serious or even fatal injury.
Support the turbocharger at a suitable point.

If possible secure it using lifting gear.

Wear safety helmet.
Cover the oil connection.

7
7.2 Page 75