Commissioning After Taking Out Of Operation - ABB TPL65-A32 Operation Manual

3.3
3.3
If provided
© Copyright 2014 ABB. All rights reserved.
Operation Manual / TPL65-A32 / -A33 / -A36 + TPL69-A32 / -A33
Commissioning
Commissioning after taking out of
operation

Commissioning after taking out of operation

Remove cover plates (blind flanges) between compressor casing

outlet and charge air duct, before gas inlet and after gas outlet.
Inspect exhaust gas duct / line in front of and after turbine for any

combustion deposits, foreign matter or residual water. Clean and
remove.
Inspect air supply line or filter silencer for any foreign matter. Clean

and remove.
Start up turbocharger oil circulation system at engine end.

Prepare turbocharger for operation as instructed in section "Inspection

work before start-up / commissioning" of chapter headed "Start-up /
commissioning".
Start up turbocharger.

TPL65: Version with compressor wheel cooling system
Remove screw plug on cooling air connection and fit cooling air line.

3
3.3 Page 36