HP MSR954 Series Installation Manual page 38

LED
LED
System status LED (SYS)
VPN status LED (VPN)
Micro SD card LED
LTE LED
2.4G WLAN status LED
SFP port LED
Status
Flashing yellow
Off
Steady green
Flashing green (8 Hz)
Flashing green (1 Hz)
Flashing yellow (1 Hz)
Flashing yellow (8 Hz)
Steady yellow
Off
Steady on
Off
Steady green
Flashing green (8 Hz)
Off
Steady green
Flashing green (8 Hz)
Steady yellow
Flashing yellow (8 Hz)
Off
Steady green
Flashing green
Off
Steady green
Flashing green
Steady yellow
36
Description
Data is being received or transmitted at
10/100 Mbps
No 10/100 Mbps link is present.
The SDRAM is performing self-test.
The system software image is being copied
and decompressed.
Comware has started with the configuration
file and the router has booted up.
The SDRAM has failed the self-test.
The extended segment does not exist.
The system software image does not exist.
No power input, or exceptions have
occurred.
A minimum of one IPSec VPN tunnel is
present.
No IPSec VPN tunnel is present.
The Micro SD card is present and has passed
the test.
The system is accessing the Micro SD card.
Do not remove the card.
No Micro SD card is inserted or the Micro SD
card is installed incorrectly.
A 4G link is present.
Data is being received or transmitted on a
4G link.
A 3G link is present
Data is being received or transmitted on a
3G link.
No 3G/4G link is present or no 4G modem
is installed.
A 2.4G WLAN link is present.
Data is being received or transmitted on a
2.4G WLAN link.
No 2.4G WLAN link is present.
A 1000 Mbps link is present.
Data is being received or transmitted at 1000
Mbps.
A 10/100 Mbps link is present.