Canon imageRUNNER 2545i Remote Ui Manual page 21

● When Department ID Management and User Management are disabled:
❑
1
1-10
Starting the Remote UI
Select the logon mode and enter the System Manager ID and System Password, or
user name.
• To log in to the Remote UI in the System Manager Mode, select the option button
for [System Manager Mode] ➞ enter the System Manager ID and System
Password.
IMPORTANT
The System Manager ID and System Password are both set to '7654321' at
purchase. Change them before using the machine. (See "To specify the System
Manager ID and System Password:," on p. 4-8.)
• To log in to the Remote UI in the End-User Mode, select the option button for
[End-User Mode] ➞ enter the user name or leave the [User Name] text box blank.
(See the note below.)
NOTE
If you are logging in to the Remote UI in the End-User Mode and want to delete
your own print job, enter your user name with which you sent the print job (it is
usually the user name for your computer). Otherwise, click [OK] to log in to the
Remote UI with the [User Name] text box left blank. (See the note on p. 1-5.)