Table of Contents
Advertisement
MANUAL SPECIFICATIONS
DOCUMENT NUMBER
The text and graphics contained within this manual are controlled by the battery charger
manufacturer's internal part number (JA5026-00). The revision level and dates of this manual's
text and graphics are listed below. These controls supercede all other available dates. The first
two and last two pages of this manual are reserved for company-specific front and back cover
artwork. Any revision levels, revision dates, or document numbers featured on the first two and
last two pages of this manual refer to the cover artwork only.
DOCUMENT INFORMATION
Document Number:
Revision Level:
Document Change Number:
Filename:
Last Date Saved:
Last Date Printed:
PARTS DATA PACKAGE
Any job-specific customized Parts Data Package report supplied with this battery
charger communications module, the corresponding battery charger, and/or this manual,
supercede any standard parts listed in this manual.
DRAWINGS
A
customized
Communications Module and/or your corresponding AT10.1 or AT30 Series battery charger,
featuring a unit-specific drawing list / data nameplate detail, outline drawing, itemized internal
component layout, electrical schematic with component ratings, and a full connection diagram.
If the standard drawings featured in this manual are not sufficient, please contact your Sales
Representative for drawing availability from the battery charger manufacturer.
Any job-specific custom drawings supplied with your AT Series Communications
Module and/or your corresponding AT10.1 or AT30 Series battery charger, supercede the
standard drawing featured in Appendix B.
36
JA5026-00
4E
20345
[JA5026-00.Rev4E.ATCommMod-manual.doc]
[8/12/2009 9:07:00
[08/12/2009 9:08
record
drawing
package
PM]
PM]
is
available
for
your
AT
Series
Advertisement
Table of Contents
