HindlePower AT Series Operating Instructions Manual page 20

DNP V3.00
DNP V3.00
DEVICE PROFILE DOCUMENT
(Also see the Implementation Table in Section 5.3, beginning on page 20.)
Requires Application Layer Confirmation:
£ Never
£ Always
T When reporting Event Data
£ When sending multi-fragment responses
£ Sometimes
£ Configurable
Timeouts while waiting for:
Data Link Confirm:
Complete Appl. Fragment:
Application Confirm:
Complete Appl. Response:
Others:
Inter-character Timeout:
Select/Operate Arm Timeout:
Binary input change scanning period:
Analog input change scanning period:
Unsolicited offline interval:
Unsolicited response notification delay:
Delay Measurement:
Synchronization:
Sends/Executes Control Operations:
WRITE Binary Outputs
SELECT/OPERATE
DIRECT OPERATE
DIRECT OPERATE – NO ACK
Count > 1
Pulse On
Pulse Off
Latch On
Latch Off
Queue
Clear Queue
Explanation of Sometimes: See the Binary Outputs point list in Section 5.4.2 starting on page 24 for a
description of which control operations are supported for each point.
18
£ None T Fixed at 2000 £ Variable £ Configurable.
T None £ Fixed at ____ £ Variable £ Configurable
£ None T Fixed at 2000 £ Variable £ Configurable,.
T None £ Fixed at ____ £ Variable £ Configurable
T
Fixed at 50 ms.
T
Fixed at 5000 ms.
T
Fixed at 5000 ms.
T
Fixed at 5000 ms.
T
Fixed at 30000 ms if unsolicited messages is off
Configurable if unsolicited messages is on. See setup.
T
Fixed at 15000 ms.
100 ms.
1000 ms.
£ Never T Always
£ Never T Always
£ Never T Always
£ Never T Always
T Never £ Always
T Never £ Always
T Never £ Always
£ Never T Always
£ Never £ Always
T Never £ Always
T Never £ Always
£ Sometimes £ Configurable
£ Sometimes £ Configurable
£ Sometimes £ Configurable
£ Sometimes £ Configurable
£ Sometimes £ Configurable
£ Sometimes £ Configurable
£ Sometimes £ Configurable
£ Sometimes £ Configurable
T Sometimes £ Configurable
£ Sometimes £ Configurable
£ Sometimes £ Configurable