Table of Contents
Advertisement
5. Insert the negative and positive voltage wire into the corresponding clamp of
the Phoenix plug terminal. Make sure that you have the right polarity of the
connection (see Fig: 7a).
6. Fasten the screws to secure the negative and positive voltage wire into the
clamps of the plug terminal.
The second end of each wire will be prepared as required for the
connection to the DC power supply.
Connect the KFM15_e to the DC power source as follows:
7. Plug the one end of the DC cable connection (Phoenix plug terminal) to the
Phoenix plug of the KFM15_e.
8. Connect the other end of the DC cable connector to a corresponding DC
power source.
15" Industrial LCD Monitor KFM15_e – User's Manual (Version 2.20)
Product Description
21
Advertisement
Table of Contents
