Table of Contents
Advertisement
Product Description
DC Connection
The length of the DC connecting wires may not exceed 10 m.
Fig. 7: DC Phoenix connector
For the DC connection prepare the connecting wires using the supplied Phoenix
plug terminal.
1. Cut the required length of two isolated wires (∅ up to 1.5 mm
2. Strip each end 5 –7 mm.
3. Twist the striped wire ends and tin it with solder.
4. Loosen the two slotted pan head screws of the DC plug terminal far enough
so that you can insert the end of the power cord.
Fig. 8: Phoenix plug terminal with positive and negative voltage wire (example)
1 Phoenix plug terminal
2 Slotted pan head screws
20
15" Industrial LCD Monitor KFM15_e – User's Manual (Version 2.20)
DC Phoenix
connector
–
+
1
2
4
Fig. 7a: DC Phoenix connector with plug
terminal (supplied)
3
3 Negative voltage wire (black)
4 Positive voltage wire (red)
DC Phoenix
connector with
plug terminal
–
+
2
).
Advertisement
Table of Contents
