Power Cord Connection; Ac Connection - Kontron Embedded Computers KFM15*e - A User Manual

Power Cord Connection

Please observe the hints described in the chapter "Safety
Instructions".
The voltage of the power source must agree with the voltage
value on the type label.

AC Connection

1. Connect the supplied AC power cord into the system AC power plug.
2. Connect the other end of the AC power cord into a corresponding outlet.
Use the power cord suitable for the power supply in your country.
Do not remove or alter the grounding prong on the power cord. In
situations where a two-slot receptacle is present, have it replaced
with a properly grounded three-prong grounding type receptacle.
15" Industrial LCD Monitor KFM15_e – User's Manual (Version 2.20)
Abb. 6: AC power plug
Product Description
AC power plug
19