Invacare Comet Series Service Manual page 30

Comet
9.
Disconnect plugs from power module.
• Disconnect motor plug.
• Disconnect plug for electromagnetic brake.
• Disconnect speedometer plug.
10.
Remove screws A on mud guard.
11. Remove mud guard B.
12.
Remove screws (1) on drive holder (2).
13. Remove drive holder (2).
30
14.
Remove screws (1) on disengaging lever (2).
15. Remove disengaging lever (2).
16. Place supporting wooden block under swing arm.
Replacing drive motor
1.
Loosen three Allen screws A.
2. Lift motor out of holder and take it out of the frames
to the side.
3. Replace motor.
Replacing drive unit
1.
Loosen and remove screw B on swing arm. For replacing
swing arm, see 4.8.3 Replacing swing arm, page 22 .
2. Loosen and remove lower bolt A on spring.
3. Lift drive unit out of holder and take it out of the frames
to the side.
4. Replace drive unit.
1603798-B