Product Warranty Statement - REO 32734 User And Operational Manual

Figure 6: Remote Plug Properly Installed
Remote Plug Missing
• Fuse Replacement.
o The fuse is located in the back panel of the laser system. The fuse can be removed
by inserting a flat tool into the slot and turning counter-clockwise. These can be
replaced with 2A/250V standard fuses.
Figure 7: Fuse Replacement

PRODUCT WARRANTY STATEMENT

Research Electro-Optics (REO) lasers and power supplies are warranted for twelve (12) months
from the date of shipment. Items will be free from defects in material and workmanship, and will
conform to the specifications provided on the REO website and published specification sheets,
under normal use and service when correctly installed and maintained. REO will either repair or
replace (at REO's sole option) any defective or nonconforming Product or part thereof which is
returned at Buyer's expense to REO's facility, provided, that Buyer notifies REO in writing promptly
after discovery of the defect or nonconformity and within the Warranty Period.
Repairs made or Products or components replaced under warranty are warranted for the
remaining unexpired duration of the original Warranty Period for such Products or components.
REO's standard repair charges shall be applicable forproducts returned for repair that are not
covered under warranty. Out-of-warranty repairs are warranted for ninety (90) days from date of
shipment of the repaired Product.
Remote Plug Properly Installed
REF-174
9