Unpacking; Shipping Inventory; Safety Information - REO 32734 User And Operational Manual

UNPACKING

• Inspect the packing container for any damage that may have occurred during shipment.
• Contact the shipper immediately if the laser or control box has been damaged during
shipping.
• Packing materials are specifically designed to protect against shipping damage.
• Carefully remove the laser system from the packing container.
• Inspect for damage including dents, scratches, or broken glass within the laser housing.
• Contact retailer immediately if the laser system appears to be damaged.

SHIPPING INVENTORY

The equipment included in this shipment will match the packing slip attached to the box. Verify
that the correct product was shipped to you by matching the serial number(s) on the packing list.
Notify retailer immediately if the shipment is incomplete or if an incorrect item was shipped.
Note: Please keep and store all packaging materials received with your product in case a return needs to be
made.
This package contains:
1 – Line Tunable Laser System
2 – Keys
1 – Remote Interlock Connector
1 – 115V Power Cord or 230V Power Cord

SAFETY INFORMATION

This laser is safe to operate provided that the user complies with all safety warnings. It is
recommended that all personnel who will operate or be in the vicinity of the laser during operation
read and be familiar with this manual as well as be made aware of the following safety warnings.
• Alterations, modifications, or improper installation can result in shock, visible
and/or infrared radiation exposure, and void of the warranty in part or entirety.
• Do not attempt to open the sealed laser system. The laser system is not
user accessible and service operations inside the enclosure must only be
performed by authorized and trained personnel. Opening the laser
system will result in loss of warranty.
• Avoid direct exposure to the laser beam.
• Laser emissions can be hazardous to the eyes.
• Never look directly into the laser light source or at scattering laser light
from reflective surfaces.
• Never sight down the beam into the source of the laser emissions.
• Install the laser so that the laser beam is not at eye level.
REF-174
3