Unpacking; Shipping Inventory; Safety Information - REO 32734 User And Operational Manual

UNPACKING

• Inspect the packing container for any damage that may have occurred during shipment.
• Contact the shipper immediately if the laser head or control box has been damaged during
shipping.
• Packing materials are specifically designed to protect against shipping damage.
• Carefully remove the laser system from the packing container.
• Inspect for damage including dents, scratches or broken glass within the laser housing.
• Contact retailer immediately if the laser or control box appear to be damaged.

SHIPPING INVENTORY

The equipment included in this shipment will match the packing slip attached to the box. Verify
that the correct product was shipped to you by matching the serial number(s) on the packing list.
Notify retailer immediately if the shipment is incomplete or if an incorrect item was shipped.
Note: Please keep and store all packaging materials received with your product in case a return
needs to be made.
This package contains:
1 – Cylindrical Laser Head
1 – Control Box
1 – Control Cable
2 – Keys
1 – Remote Interlock Connector
1 – 115V Power Cord
1 – 230V Power Cord
.

SAFETY INFORMATION

This laser is safe to operate provided that the user complies with all safety warnings. It is
recommended that all personnel who will operate or be in the vicinity of the laser during operation
read and be familiar with this manual as well as be made aware of the following safety warnings.
• Alterations, modifications, or improper installation can result in shock, visible
and/or infrared radiation exposure, and void of the warranty in part or entirety.
• Ensure that the laser head is securely connected to the power supply. To
prevent faulty operation make sure that the male connector is fully
seated in the back of the power supply.
• The helium neon laser can collect charge during operation acting as a
capacitor. Once the power supply is turned off, best practice is to leave
the high voltage cable connected to the power supply. If the high voltage
cable is removed from the power supply the prongs should be shorted
REF-176
3