Assembly Instructions - Stamina 15-4800R Owner's Manual

ASSEMBLY INSTRUCTIONS

Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all
packing materials from your area and place them back into the box. Do not dispose of the packing materials
until assembly is completed. Read each step carefully before beginning. If you are missing a part please
call our toll-free number for assistance 1 (800) 375-7520 or e-mail us at:
STEP 1:
Attach the
FRONT FRAME(1)
WASHERS(M8)(74),
STEP 2:
Rotate the
ADJUSTMENT KNOB(44)
Pull the
FRAME(3)
in position by inserting the pin of the
REAR FRAME(3),
holes in the
FRAME(3)
securely. Attach the
REAR FRAME(3)
the
WASHERS(M8)(74),
NOTE:
You can adjust the
Bike stable.
parts@staminaproducts.com
FRONT STABILIZER(2),
CARRIAGE BOLTS(M8 x 75mm)(55), ARC WASHERS(M8)(71), LOCK
with
ACORN NUTS(M8)(68).
and
ADJUSTMENT KNOB(44)
and slide the
then rotate the
REAR STABILIZER(4),
CARRIAGE BOLTS(M8 x 75mm)(55), ARC WASHERS(M8)(71), LOCK
with
ACORN NUTS(M8)(68).
and
LEVELING CAPS(49)
the short one with the
counter clockwise until the knob portion can be pulled.
REAR FRAME(3)
ADJUSTMENT KNOB(44)
ADJUSTMENT KNOB(44)
the one with the
REAR STABILIZER(4)
on the
6
WHEELS(48),
onto the front of the
backward. Lock the
into one of the adjustment
clockwise to lock the
LEVELING CAPS(49),
to keep the Recumbent
REAR
REAR
onto