U‐Hub
The keyboard shortcut to rename a U‐Hub is F2.
Delete
Removes the U‐Hub from the system. This will open a confirmation window; ‐
Click OK if you are sure or Cancel if not.
IP Settings
By default, the U‐Hub is set to dynamic IP so will require a Lan with DHCP present to assign an IP. In a standard MLA system this
is provided by the Zone Director housed in the Master rack. The U‐Hub can be changed to Static IP for sophisticated networks
which may be shared by many devices. Right clicking and selecting IP Settings opens this window; ‐
To change to Static IP click on 'Set IP address manually: static mode' ; ‐
U‐Hub User Guide V1.0
USER GUIDE
45