Table of Contents
Advertisement
U‐Hub
Vu‐Net
Introduction
Vu‐Net is the application used to connect to a U‐Net enabled device such as the Multicellular family of products, the DD12, PSX,
CDD Live, iKon amplifiers or Merlin processor. Connection to the cabinets and processors is achieved using the U‐Net network
protocol. Vu‐Net is used to monitor and control the system, EQ optimisations for multicellular arrays are uploaded from the
program and cabinet firmware is checked and updated. Vu‐Net is supplied ready installed on the Panasonic tablet PC supplied
with MLA and MLA Compact systems. It is an optional method of control for full use of MLA Mini, DD12, PSX and CDD Live.
Menus
Before we look at the design process that is used with a system it is worth taking a look at the file structure which we will refer
back to throughout the chapter. When you run Vu‐Net you will see the following Window; ‐
This is a blank screen with only 'New Project' and 'Open Project' active prompting you to start by using one or the other. Start
by clicking on 'New Vu‐Net project. You will see the following window; ‐
Type a name for your project and select a suitable file location. As with Display 2.1 we would recommend creating one folder for
all related files for a given event.
U‐Hub User Guide V1.0
USER GUIDE
20
Advertisement
Table of Contents
