Table of Contents
Advertisement
U‐Hub
This window will show all array components on the network and is used for all configuration changes and system monitoring.
The palette on the left is used to manually enter system components when working off line (in normal use, Device Discovery is
used to find all connected components). If you need to maximise the workspace the palette can be minimised by clicking on the
white triangle in the top left corner of the palette; ‐
The overall size of the System Diagram can be increased or decreased by clicking and holding on the gap between its right‐hand
edge and the left‐hand edge of the other windows. You can then drag either left or right to adjust the relative sixes of the
windows. Alternatively, the white drop‐down arrow gives you the option to maximise the screen. The other windows will not be
closed; they will be represented by an icon on the right side of the page with the option to restore. Clicking restore will return
the windows to their previous state.
On the right side of the window are two further windows; ‐
The first is a project overview window showing the open project. The window can be maximised, detached or closed by clicking
on the white arrow in the top right corner. The project icon can be expanded if they have a small arrow to the left (a project that
doesn't yet have any components added or discovered will not show an arrow). This will then show all connected components
U‐Hub User Guide V1.0
USER GUIDE
33
Advertisement
Table of Contents
