Table of Contents
Advertisement
U‐Hub
Panel Layouts
1. On Line Indicator‐ Illuminates to show that the U‐Hub is connected to an Ethernet network
2. IP Reset‐ Resets a U‐Hub that has been configured for static IP back to dynamic
3. Static IP‐ Indicates that the U‐Hub has been configured for static IP
4. U‐Net Status‐ The U‐Net LED will illuminate green when a good connection is made to a U‐Net
enabled device connected to port 1
5. U‐Net Connections‐ Six ODU connectors provide U‐Net connectivity consisting of Port 1, port
2 and two linked pairs. Port 1 and the 'Out' connection of each linked pair also carry audio routed
from the input connectors on the rear panel.
6. U‐Net Status‐ The U‐Net LED will illuminate green when a good connection is made to a U‐Net
enabled device connected to port 2
7. Power Indicator‐ This red indicator is lit when power is applied
U‐Hub User Guide V1.0
USER GUIDE
15
Advertisement
Table of Contents
