Table of Contents
Advertisement
U‐Hub
Network: The Network option is an important section for determining how devices are found on the Ethernet network; ‐
Running the application off line will display a blank window. When you have one or more U‐Hubs connected (usually at least two
for MLA and MLA Compact systems) their unique IP address will appear listed in the bottom 'Available IP addresses'. You can set
an IP address Filter in the smaller window which will search only for IP addresses within the range of values between the two
entered which should be separated with a comma; ‐
This could be used if you have two systems running on the same Ethernet network and need to control them independently.
Only devices with their IP address set to values within the filter range will be found and the system will work completely
independently as if there were no other devices on the network.
U‐Hub User Guide V1.0
USER GUIDE
25
Advertisement
Table of Contents
