Silvercrest KH 2600 Operating Instructions Manual page 24

Setting the wake tone
GB
IE
22
Press the ►►I button
repeatedly to select a wake tone:
→ → →
delete. (For an explanation of the symbols see
chapter Display.)
Press the button to activate, in addition, the
wake-up light function.
NOTICE
► Set the volume that you want to be woken with as described in the chapter
Setting the volume.
► Set the light intensity that you want to be woken with as described in the
chapter Reading lamp.
► The wake-up light function can only be activated together with a wake
tone. The light intensity increases in the 30 minutes before the set wake
time and the symbol blinks in the display
► To be woken with the wake-up light only the volume must be set to 00.
Press the ALARM1/DOWN button
device or the AL1/AL2 button on the remote control again to confi rm the
setting or wait approx. 7 seconds and the alarm will be confi rmed automati-
cally.
The symbol for the selected wake tone blinks in the display and the alarm goes
off via the speaker with the arrival of the wake time.
NOTICE
► If you want to use music from your iPod/iPhone as the wake tone select a
title on the iPod/iPhone (or an album and/or playback list) that is to be
used as a wake tone. Your choice will be played back when the set wake
time arrives.
Handling and operation
11 13
or the I◄◄ button
→ → → →
18
/ALARM2/UP button
4
.
16
on the
KH 2600