Reading Lamp - Silvercrest KH 2600 Operating Instructions Manual

Reading lamp

GB
IE
Replacing the halogen lamp
20
You can use the device as a reading lamp.
Press the button
lamp on and off .
Press the /
light intensity (00 to 20) are shown in the display
NOTICE
► If you have set the light intensity to 00 you can, by all means, set a higher
value, the lamp remains, however, switched off and must be switched back
on via the button
► The light intensity that you have selected will also be saved automatically
as the light intensity for the wake function.
2
The halogen lamp must be replaced if it is defective or the light intensity
decreases.
DANGER
Risk of fatal electrocution!
► Pull the plug from the mains socket before you change the halogen lamp
NOTICE
► The halogen lamp
type: E27 42 W.
Turn the lamp housing
tion of the arrow and lift it upwards.
Unscrew the defective halogen lamp
from the lamp socket.
Screw a new 42 W halogen lamp into
the lamp socket.
Place the lamp housing
from above and turn it in the opposite
direction to the arrow to attach.
Handling and operation
19
on the device or on the remote control to switch the
button to set the brightness. The symbol
19
on the device or on the remote control.
2
must only be replaced with one of the same lamp
in the direc-
carefully
and the
4
.
2
.
KH 2600