Playback Of External Audio Devices; Playback Of Nature Sounds; Mood Lighting - Silvercrest KH 2600 Operating Instructions Manual

Handling and operation

Playback of external audio devices

Connect an external audio device, for example, an MP3 player to the
3.5 mm jackplug socket AUX IN
Press the FUNC. button
Start playback of the external audio device and set the volume.
NOTICE
► Follow the operating instructions for the external audio device.

Playback of nature sounds

Press the
to switch the device on.
° Press the FUNC. button
tion
Select with the ►►I button
4 nature sounds:

Mood lighting

Press the SNOOZE button
The LEDs light up in the following sequence:
blue → red → red + blue → green → green + blue → red + green → all LEDs → etc.
Press the SNOOZE button
this colour permanently.
Press the SNOOZE button
NOTICE
► Instead of the SNOOZE button
control can also be used.
► The colour setting via the SNOOZE button
function has been activated.
KH 2600
12
several times to select the AUX function.
/ALARM OFF button
12
several times to select the nature sounds func-
.
11
or the I◄◄ button
Rain
Babbling brook
Seagulls
Rural life
8
on the device to switch on the mood lighting.
8
again when the desired colour lights up to set
8
once more to switch off the mood lighting.
22
on the rear panel of the device.
20
or the button on the remote control
13
between the following
8
the COLOUR button on the remote
8
will not work if the SNOOZE
GB
IE
19