Handling and operation
GB
IE
Switching On and Off
Setting the time
14
In this chapter you receive important information for the handling and operation
of the device.
Press the
/ALARM OFF button
to switch the device on. The display
Press the
/ALARM OFF button
to switch the device off . In the display
temperature and a programmed alarm time (Standby mode).
NOTICE
►
The
/ALARM OFFbutton
from the mains power. To completely disconnect the device from the mains
power the mains power cable plug
Prerequisite: The device is in standby mode.
Press the MEMORY/TIME button
control. The hour indicator in the display
Press the SLEEP button
12h/24h time of day display.
Set, with the ►►I button
hour. With each button press the time changes by one hour. Holding down
the respective button for more than 2 seconds starts the speed setting.
Press the MEMORY/TIME button
control. The minute indicator in the display
Set, with the ►►I button
minutes. With each button press the time changes by one minute. Holding
down the respective button for more than 2 seconds starts the speed setting.
Press the MEMORY/TIME button
control to confi rm the time input or wait for approx. 7 seconds after which
the time input will be automatically confi rmed.
NOTICE
►
The time of day will revert back to 0:00 o'clock if the device is disconnected
from the mains power supply with no back-up batteries inserted or if the
back-up batteries are too weak.
Handling and operation
20
or the
4
is activated.
20
or the
4
is shown the time of day, the
20
does not completely disconnect the device
23
must be pulled from the mains socket.
17
or the TIME button on the remote
4
blinks.
14
for approx. 2 seconds to switch between the
11
or the I◄◄ button
17
or the TIME button on the remote
4
11
or the I◄◄ button
17
or the TIME button on the remote
button on the remote control
button on the remote control
13
, the current time of day
blinks.
13
, the current time of day
KH 2600