Safety Precautions - Hanil HyperCOOL HC3055 Operation Manual

1. Safety Precautions

1.3 Safety Precautions
Before using the device, please read this operation manual to ensure correct usage. Incorrect
handling of the device may possibly result in personal injury or physical damage on the
device or its accessories.
1. ALWAYS locate the device on a flat, rigid and stable table capable of withstanding the
weight of the device and its operation.
2. ALWAYS make a safety zone of 30 cm around the device to indicate that neither
hazardous materials nor persons should be permitted within the area during operation.
▶ ALWAYS position the device with enough space on each side of device to ensure
proper air circulation.
3. The line voltage of the installation site should be within the rated voltage of this product. If
not complied, the device can be damaged.
4. Only use accessories manufactured by Hanil Scientific Inc. Hanil Scientific Inc. does not
guarantees any problems occurred by using incompatible accessories.
5. Remove any contaminants inside the chamber before operating the device.
6. Should not use flammable, toxic, radioactive, explosive or corrosive materials.
7. The containers should be kept level while drying the samples in them.
8. Any kind of device repair must be performed only by Hanil Scientific Inc. authorized service
engineers.
9. A proper disinfection procedure should be carried out before delivering the device to
service engineer.
10. Maintain all the accessories dry and clean to keep the best condition and to increase the
lifespan.
11. Avoid exposing the device to direct sunlight, extreme temperatures, or moisture.
Technical Support : +82-2-3452-8966 / techsupport@ihanil.com
5 / 26