4. Operation
4.4 Vacuum
VACUUM function is to turn on or off the vacuum pump, where the VACUUL LED indicates
current status of the vacuum pump.
▶ While the vacuum pump is resting, the VACUUM LED flashes.
▶ While the vacuum pump is running, the VACUUM LED is ON.
The vacuum pump is turned off by pressing VACUUM button.
1. Press VACUUM button to evacuate the
HyperCOOL chamber.
▶ VACUUM LED flashes when the vacuum
pump is off and turns on when the
pump starts to operate.
▶ When the temperature of the condenser reaches -50℃, the vacuum pump automatically
starts to operate.
The pump can turn on by pressing the VACUUM button when the temperature reaches -30℃.
2. When the pump is on, it turns off by pressing
the VACUUM button. The HyperCOOL allows air
into the chamber by opening the vacuum release
valve on the backside.
▶ The vacuum release can be adjusted by turning the
release valve.
(1) Vacuum: Tightened the valve by turning clockwise
(2) Vacuum release: Loosened the valve by turning
counterclockwise
16/26
www.ihanil.com
Vacuum release valve