Hanil HyperCOOL HC3055 Operation Manual page 12

3. Installation
3.3 HyperCOOL Connection
[HyperCOOL as a 'Cold Trap']
①
① Rubber Valve Closed
② Tube Connection to Vacuum Pump
③ Mains Inlet
④ Vacuum Pump to HyperCOOL
⑤ Vacuum Pump to Power Outlet
⑥ Mains Inlet
⑦ HyperCOOL to HyperVAC
⑧ Rubber Valve Open
[Preparation]
DEFROST should be performed only when the vacuum pump is off.
While DEFROST function is activated, HyperVAC (the vacuum concentrator) should be run
at lower than 1,000 rpm not to turn on the vacuum pump.
12/26 www.ihanil.com
②
③
⑧
⑦
⑥
④
⑤