Display; Defrost - Hanil HyperCOOL HC3055 Operation Manual

4. Operation

4.2 Display

Temperature: displays actual
temperature. (℃)
Time: displays operating time (H:M)
▶ The range of time displayed is
999 hours and 59 minutes.

4.3 Defrost

▶ Disconnect power from the pump before performing the Defrost function.
And vacuum release process should be followed not to allow additional moisture into
chamber. It can be done by opening the vacuum release valve on the backside of the
HyperCOOL and will take up to a minute.
▶ After the vacuum release process, press the DEFROST button to start defrosting.
▶ Open the drain valve to remove the water melted from the chamber ice.
▶ The residual water should be removed before starting new process.
Technical Support : +82-2-3452-8966 / techsupport@ihanil.com
Defrost function warms the wall of the condenser and facilitates
the release and easy removal of the "ice-plug".
Defrosting function is activated with the LED on
when the DEFROST button is pressed.
Drain pipe
Turn the drain valve counterclockwise, to remove it
completely from the drain pipe.
Drain valve
15/26