5. Maintenance
5.1 Outer Part of the Device
1. Clean the outside of the device with dry soft cloth.
If necessary, dip the cloth in neutral detergent and clean any contaminants.
Keep it completely dry after cleaning.
2. Do not use any volatile chemicals such as alcohol, benzene, benzole, and thinner, etc.
3. Be careful not to make scratches on the surface of the device.
▶ Scratches may cause corrosion on the surface of the device.
▶ Rusted parts should be cleaned with neutral detergents and kept dry.
5.2 Inside the Chamber
1. Keep dry inside the chamber after every use.
2. If the chamber is contaminated, clean contaminated area with the cloth dipped in neutral
detergent.
5.3 Removing Dirt on the Condenser
Dirt should be removed periodically to keep the best performance of the condenser.
The electric power should be OFF during the cleaning process.
Technical Support : +82-2-3452-8966 / techsupport@ihanil.com
19/26