Childproof Lock; Activating And Deactivating The Childproof Lock; Wipe Protection; Activation - Siemens EX8..KY Series Instruction Manual

Hide thumbs Also See for EX8..KY Series:
Table of Contents

Advertisement

Childproof lock

en
AChildproof lock
Y ou can use the childproof lock to prevent children
C h i l d p r o o f l o c k
from switching on the hob.
Activating and deactivating the childproof
lock
All cooking zones must be switched off.

Activation

Open the docking menu.
1.
Touch the
symbol.
'
2.
The childproof lock is now activated. The hob is now
locked.

Deactivating

Follow the instructions on the display panel.
The lock is now released.
Childproof lock
With this function, the childproof lock automatically
activates when a hob is switched off.
Switching on and off
You can find out how to switch the automatic childproof
lock on in the ~ "Basic settings" section
40
kWipe protection
W iping over the control panel while the hob is switched
W i p e p r o t e c t i o n
on may alter the settings. To avoid doing this, you can
use the hob's "Lock control panel for cleaning" function.
Activation
Open the docking menu and touch the
An audible signal will sound. The control panel will
remain locked for 30 seconds.
You will now be able to clean the surface of the control
panel without altering the settings.
Deactivating
After 30 seconds, an audible signal will sound and the
control panel will be unlocked.To deactivate the
function early, follow the instructions on the display
panel.
The cleaning lock does not lock the main
Note:
switch.The hob can be switched off at any time.
bAutomatic safety cut-out
I f a cooking zone operates for an extended period and
A u t o m a t i c s a f e t y c u t - o u t
no settings are changed, the automatic safety switch-off
is activated.
This stops the cooking zone from heating up. A
notification will appear on the display.
Touching any symbol will switch off the display. The
cooking zone can now be reset.
The point at which the automatic safety switch-off
becomes active depends on the power setting in use
(after 1 to 10 hours).
symbol.
Ñ

Advertisement

Table of Contents
loading

Table of Contents