Flexplus Zone; Notes Regarding Cookware; Activation; Deactivating - Siemens EX8..KY Series Instruction Manual

FlexPlus Zone

en
}FlexPlus Zone
T he hob has two FlexPlus cooking zones which are
F l e x P l u s Z o n e
located between the two flexible cooking zones and
which switch on in conjunction with the right- or left-
hand flexible cooking zone. This means that larger
cooking vessels can be used and better cooking results
can be achieved.
Each FlexPlus cooking zone always switches on in
conjunction with the right- or left-hand flexible cooking
zone. It is not possible to switch them on independently
of one another.

Notes regarding cookware

The cookware should be positioned centrally for good
thermal detection and distribution.
The cookware should cover the side hotplate and the
FlexPlus cooking zone.
Depending on the size of the cookware, the flexible
cooking zone can be activated as two independent
hotplates or as one hotplate:
Set down the cookware
18
Elongated cookware:
Activate the flexible cooking zone as
two independent hotplates or as one
hotplate.
Large round cookware:
Activate the flexible cooking zone as a
single hotplate.
The cookware must not cover both
FlexPlus cooking zones at the same
time.

Activation

Set down the cookware on the hotplate and make
1.
sure that it also covers the FlexPlus cooking zone.
Select the cooking zone and the required heat
2.
setting. The FlexPlus display lights up.
The flexible cooking zone is activated.

Deactivating

Remove the cookware from the hotplate. The displays
go out.
This deactivates the FlexPlus cooking zone.