Table of Contents
Advertisement
en Familiarising yourself with your appliance
4 Familiarising yourself with your appliance
4.1 Control panel
You can use the control panel to configure all functions
of your appliance and to obtain information about the
operating status.
4.2 Indicators/symbols
The displays show selected values and functions.
Display
Name
-
Heat settings
/
Residual heat
Electronic boil start control
Timer
4.3 Touch fields
Touch fields are touch-sensitive surfaces. To select a
function, touch the relevant field.
Touch
Name
field
Main switch
Electronic boil start control
Hotplate selection
Childproof lock
Wipe protection
Settings range
or
Automatic zone control
Timer
Notes
¡ Always keep the control panel dry. Moisture impairs
the function.
¡ Do not pull pans close to the displays and touch
fields. The electronics may overheat.
4.4 Hotplates
You can find an overview of the different activations of
the hotplates here.
If you operate the activations, the relevant displays light
up.
6
If you switch on a hotplate, it will switch to the setting
last selected.
Hot-
Name
plate
Single-circuit
hotplate
Dual-circuit
hotplate
Dual-circuit
hotplate
Extended
cooking zone
Notes
¡ Dark areas in the glow pattern of the hotplate are
part of the technical design. They do not affect the
functionality of the hotplate.
¡ The hotplate regulates the temperature by switching
the heat on and off. The heat may also switch on
and off when on the highest setting.
Reasons:
– Easily damaged components are protected
against overheating.
– The appliance is protected from electrical over-
load.
– This achieves a better cooking result.
With multi-circuit hotplates, the heating of the hot-
plate and the activated areas may switch on or off
at different times.
Activating and deactivating
Select hotplate.
Select hotplate and touch
or
.
Select hotplate and touch
Select hotplate and touch
.
.
Advertisement
Table of Contents
