Cd Ripping Function - Silvercrest KH 6521 Operating Instructions Manual

• To superimpose the folders available on the disc press the
repeatedly until the notice FOLDER appears at the bottom of the display.
PROG
• Press the button again repeatedly until the notice FILELIST appears at
the bottom of the display. Folders will now be faded out and all data on
the disc is represented in a list.
• The area on the right is intended for the previewing of JPEG images.
A preview appears as soon as you highlight a JPEG file in the file window.
• At the bottom is located the information bar, in which is displayed the image
size (JPEG Image) as well as the medium (DISC, USB or CARD), on which
the files are located.
• Select a file with the aid of the navigation buttons
ENTER
selection by pressing the
or the JPEG Photo displayed.
1. To open a folder select the folder and press the
of the folder will be listed.
2. To reach a higher folder level select the symbol
ENTER
press the button.
Playback of JPEG discs
• With the navigation buttons
PLAY/PAUSE
button or the button to open the image.
The image is shown on the display
Subsequently change the view to the next available image on the disc/in the
folder.
• To display the currently shown image press the
• To continue the playback press the
• You can access an image directly by entering the image's file number with
the number buttons and subsequently confirm the entry with the
• With the navigation buttons
during playback.
• With the navigation buttons
or vertically during playback.
STOP
• During playback press the
images in the folder/on the disc. 12 miniatures will be displayed on each
page.
• Select with the navigation buttons
ENTER PLAY/PAUSE
with or .
• Select with the navigation buttons
from the bottom display lines and confirm the entry with the
Slide Show Starts a slide show of the images in the folder/on the disc
Menu Shows the available button functions for JPEG playback.
ENTER
Press the
Prev switches to the previous page
Next switches to the next page
MENU
• Press the button to switch to the file list again
Selection of slide show transitions:
You can select different transitions for changing from one image to the next.
WIPE TOP, WIPE BOTTOM, WIPE LEFT, WIPE RIGHT, DIAGONAL WIPE
LEFT TOP, DIAGONAL WIPE RIGHT TOP, DIAGONAL WIPE LEFT BOTTOM,
DIAGONAL WIPE RIGHT BOTTOM, EXTEND FROM CENTER H, EXTEND
FROM CENTER V, COMPRESS TO CENTER H, COMPRESS TO CENTER V,
WINDOW H, WINDOW V, WIPE FROM EDGE TO CENTER and NONE.
PROG
. You confirm the
button. The file will be played back and/
ENTER
button. The contents
with the entry ".." and
highlight an image and press the
PLAY/PAUSE
button longer.
PLAY/PAUSE
button again.
ENTER
you can rotate the image in 90° increments
you can mirror the image horizontally
button to display a miniature view of all
an image and start playback
one of the following entries
ENTER
button until this menu has faded out.
button • During the slide show press the
transition appears in the upper left corner of the television screen.

14. CD Ripping function

With the DVD player you can transfer music and speech files in the format
.cda (CD Audio) or from a disc onto a USB memory stick. Thereby files in
the MP3 format will be saved onto the USB memory stick.
Note:
When transfering audio files to a data carrier be aware of the existing copyright
laws and regulations! Make sure that you are producing copies for private
use only and do not violate applicable laws!
ENTER
• Place an audio CD into the disc tray.
• Insert a USB memory stick into the USB port.
button. • Whilst playback is stopped press the
control. The menu depicted above appears on the television screen.
Speed
Bitrate
Create ID3
button. • Select, with the control buttons
Title list and confirm with the
a tick. In the same way you select further titles for copying in MP3 format.
• To mark all titles for copying in MP3 format select, with the control buttons
the input Select all and confirm with the
All titles will be marked with ticks.
• To cancel the marking of all titles select, with the control buttons
input Select none and confirm with the
deleted.
• To start the copying process select, with the control buttons
the input Start and confirm with the
• To exit the CD-Ripping function select, with the control buttons
the input EXIT and confirm with the
- 19 -
PROG
button until the name of the desired
RIPPING MENU
Select this menu input to set the speed of the transfer either
to Normal or Fast.
Select this menu input to set the MP3 quality. Possible bitrates
are 96 kbps, 112 kbps and 128 kbps. A higher bitrate
will result in a larger
MP3 file on the data carrier after copying.
Select this menu input to automatically create an ID3 tag
for the MP3 files.
, a title from the
ENTER
button. The title will be marked with
ENTER
button. The markings will be
ENTER
button.
ENTER
button.
button on the remote
ENTER
button.
, the
,
,