Silvercrest KH 2217 Operating Instructions Manual page 16

With each push on the buttons
the available alarm options.
1. To switch on the alarm call with signal tone, repeatedly press the
AL1/VOL+
button
display. The alarm time is shown on the display.
The signal tone becomes louder the longer it sounds.
2. To switch on the alarm call with radio,repeatedly press the button
AL1/ VOL+
, until the radio symbol appears in the field
The alarm time is shown on the display.
3. To switch off the alarm function, repeatedly press the button
until a symbol no longer appears in the field
The alarm time is nonetheless shown in the display, but the signal tone
or radio does not sound at the programmed time.
Note:
The alarm function is only active when the bell symbol or the radio symbol
AL1
in the fields or
valid for the button
To switch off the alarm function to the following day
To switch off the alarm sound press one of the following buttons:
AL1/VOL+
• Button
AL2/VOL–
• Button
RADIO ON/OFF
• Button
SLEEP.
• Button
The switching off of the alarm sounds is confirmed by a signal tone,
except with the button
AL1/VOL+
until the bell symbol appears in the field
AL2
are visible. The action steps described are also
AL2/VOL–
.
,
,
,
RADIO ON/OFF
AL2/VOL–
or
AL1
.
- 16 -
you switch through
AL1
on the
AL1
.
AL1/VOL+
.