Silvercrest KH 2217 Operating Instructions Manual page 15

Setting the alarm time
You can programme in two different alarm times,
Alarm times can only be programmed with the radio switched off.
1. Press the button
The alarm time AL1 blinks.
HOUR+ SET
The button
held down firmly.
2. Press the button
3. As soon as the desired hour indication is shown in the display for
AL1
alarm time
numerous times in succession or held down firmly.
4. Press the button
5. As soon as the desired minute indication is shown in the display for
AL1
alarm time
6. Press the button
The programmed alarm time will be taken over.
7. To programme in the second alarm time, repeat the steps 1 to 6.
8. However, instead of pressing button
Switching the alarm function on
Note:
If you wish to be woken by the radio, programme in both the desired
sound volume and the radio station for the alarm call in advance
(see chapter "Adjusting the volume").
AL1 SET
.
can be pressed numerous times in succession or
HOUR+ SET
to set the hours.
, release the button. The button
MIN+ SET
, to set the minutes.
, release the button.
AL1 SET
or wait a few seconds.
AL1
MIN+ SET
AL1 SET
, press the button
- 15 -
AL2
and .
can be pressed
AL2 SET
.