Advertisement
Table of Contents
INSTALLATION INSTRUCTIONS (Page 1 of 2)
LC200WA2 Wall Mount for Flat Panel Screens up to 32"
with up to 200mm x 200mm VESA Mounting Patterns
3/8" Hex Bolt
5/16" Hex Bolt
VESA Plate
lc200wa2_ins (12/07)
Wall Plate
(3pcs.) Lag Screws
(2pcs.) Covers
(4 pcs.) Cover Screws
©2007 Lucasey Manufacturing Corporation, Oakland, California
1. Remove the 5/16" Hex Bolt from the Wall Arm. Set aside the VESA Plate
and hardware for Step 9.
2. Remove the Covers and the 3/8" Hex Bolt from the Wall Plate. Set aside
the Covers and hardware for Step 5.
3. Use the Wall Plate as a template to mark and drill 1/8" pilot holes for each
of the Lag Screw locations. Check to make sure the Wall Plate is level before
marking and drilling the pilot holes. Drill the top and bottom holes first. Then,
drill the middle pilot hole with the Wall Plate level. ( If installing in metal studs
a hardware kit can be purchased separately, WMATB3.)
4. Use the provided Lag Screws to securely fasten the Wall Plate to the wall.
Tighten the top and bottom screws before tightening the middle screw to
allow for some adjustment to make the Wall Plate level.
5. Replace the 3/8" Hex Bolt and Covers. Test the Wall Arm to make sure
the Wall Plate is holding securely.
Hardware List
#14 x 2-1/2" HWH Lag Screws ............................3
3/8-16 x 4-1/2" Hex Bolt ..................................... 1
3/8" Flat Washers ............................................... 7
3/8-16 Nylock Jam Nut ........................................ 1
1/2" Caps ............................................................ 3
5/16-18 x 2-1/4" Hex Bolt .................................. 1
5/16" Flat Washers ............................................ 2
5/16-18 Nylock Nut ............................................. 2
5/16-18 x 1-1/2" Socket Button Head Screw ...... 1
5/16" Belleville Washer ..................................... 2
1/4-20 x 1-1/2" Socket Button Head Screw ........ 1
1/4" Belleville Washer ....................................... 4
1/4-20 Nylock Nut ............................................... 1
#8-32 x 1/2" Phillips Self Tapping Screws ........ 4
4mm x 25mm Set Screws
... 6
5mm x 30mm Set Screws
... 6
6mm x 30mm Set Screws
... 6
4mm x 12mm Phillips Screws ... 6
5mm x 12mm Phillips Screws ... 6
6mm x 12mm Phillips Screws ... 6
4mm Hex Nuts
... 12
5mm Hex Nuts
... 12
6mm Hex Nuts
... 12
5mm Flat Washers ... 36
1/4" Flat Washers ... 18
www.lucasey.com
Advertisement
Table of Contents
Related Manuals for Lucasey LC200WA2
Summary of Contents for Lucasey LC200WA2
- Page 1 INSTALLATION INSTRUCTIONS (Page 1 of 2) LC200WA2 Wall Mount for Flat Panel Screens up to 32" with up to 200mm x 200mm VESA Mounting Patterns 1. Remove the 5/16" Hex Bolt from the Wall Arm. Set aside the VESA Plate and hardware for Step 9.
- Page 2 INSTALLATION INSTRUCTIONS Page 2 of 2 LC200WA2 Wall Mount for Flat Panel Screens up to 32" with up to 200mm x 200mm VESA Mounting Patterns Monitor Attaching Screws 6. Attach the monitor to the VESA Plate using hardware appropriate for the threaded inserts on the monitor as specified by the manufacturer.
Need help?
Do you have a question about the LC200WA2 and is the answer not in the manual?
Questions and answers