Table of Contents
Advertisement
4 (30)
2
Safety Instructions
Note!
Reduce the risk of accidents by studying all the instructions
carefully before starting work. If questions arise regarding the
safety instructions, contact your supervisor or the local Ericsson
company.
Read and follow all warning notices and instructions found on the product or
included in the BRU3 manual. Ericsson takes no responsibility if the labels have
disappeared from a BRU3 due to accident or age.
Where local regulations exist, these are to be followed. The safety information
in this manual is a supplement to local regulations.
It is the responsibility of the local project manager to make certain that local
regulations are known and followed.
The relevant manual (including this safety information) and specific
instructions supplied by Ericsson must be followed in any work performed on
the Ericsson products or systems. Sufficient knowledge of English or of any of
the other languages in which the manuals or instructions are printed is
necessary.
The safety information in the relevant manuals presupposes that any person
performing work on Ericsson products or systems has the necessary education,
training and competence required in order to perform that work correctly. For
certain work, additional training or special training may be required. For more
precise information on the amount and content of the general and/or special
training required for work on Ericsson products or systems, please contact the
supervisor or the local Ericsson company.
The BRU3 is intended to be used with a three-wire mains connection plug - a
plug which has a grounding pin. This is a safety feature. Grounding of the
BRU3 is vital to ensure safe operation. Do not defeat the purpose of the
grounding type plug by modifying the plug or using an adapter.
The slots and openings in the bottom of the BRU3 are provided for ventilation.
To ensure reliable operation of the product and to protect it from overheating,
these slots and openings must not be blocked or covered.
BRU3 MANUAL
BRU3 MANUAL, Doc.no: b3saf_en Uen Rev PH1, 2003-10-20
Advertisement
Table of Contents
