Using An Unsuitable Power Supply - TagMaster S1566 Installation Manual

TagMaster AB
HW Installation Guide
13.7

Using an unsuitable power supply

If an unsuitable power supply is used for powering the Readers, its functions may be unreliable.
In worst case the Reader does not work at all. The power supply used for a TagMaster Reader
must deliver a DC power according to following specifications:
Power supply type
24VDC
12VDC
DEFAULT for S1566
The voltage from the power supply must stay within the specified limits all the time.
This also includes a possible ripple-voltage from the power supply.
TROUBLE SHOOTING
Voltage limits min DC-current
20 - 28 Volt 200 mA
10 - 14 Volt 550 mA
Manual issue 01
23