Connecting Cable Recommendation - TagMaster S1566 Installation Manual

TagMaster AB
HW Installation Guide
9.2.2

Connecting Cable recommendation

Core:
Pair:
Cable Assembly:
Colour Code:
Maximal Cable Length:
CAUTION
not work properly if these recommendations are neglected.
MECHANICAL INSTALLATION
Conductor: 0.6mm² 19/0.2mm tinned copper
Insulation: Conforms to RSE/STD/024 – Part 6 Type IV
Diameter: 1.40mm ± 0.05mm
2) of the above Cores twinned together
3) of the above Pairs (Items 1-3) cabled together
Binder: Wrapped with polyester tape
Drain wire: 0.6mm² 19/0.2mm tinned copper
Screen: 0.127mm tinned copper braid, 84% minimum coverage
Sheath: Black irradiation cross-linked ZX elastomer
1.15mm nominal radial thickness
Diameter: 8.05mm ± 0.5mm
Pair Cores Blue, Brown and number printed 1 to 3
20 m
The cable is recommended to fulfil theses requirements. The reader might
Manual issue 01
16