AUTO BRACKETING
This function of the camera lets you take a sequence of pictures of the
same subject at three different exposure levels; Appropriate Exposure,
Under Exposure and Over Exposure. If it is difficult to determine the proper
exposure, please use this function.
The camera will take three pictures in the following sequence; Appropriate
■
exposure, under exposure and over exposure.
The number of Auto Bracket exposures will be displayed on the Top LCD panel
■
as follows. (The value of the Auto Bracketed exposure and exposure counter
will be displayed together.)
First Frame
For example: If you set the bracketing amount to 2.0, the indicator in the
■
viewfinder will show as follow.
First Frame
Second Frame
Third Frame
73
1
Set the "D"-dial to
2
Turn the "C"-dial to set the bracketing
amount. (It can be set in 1 ⁄ 3 EV step
increments up to ±3 EV).
3
Set the "D"-dial to drive area (P.14).
Second Frame
P,A,S
mode
0.0
2.0
2.0
* Measured Value
-2.0 EV deviation from Measured Value
+2.0 EV deviation from Measured Value
position.
Third Frame
M mode