Magnified Images In Image Info Screen - Sigma SD15 User Manual

While in Image Info Screen:
Press again or
view.
Use arrows on the 4-way controller to change the image selection the same
way as in Single-Image View. (See next section for the exception.)
CAUTION !!
•
While in Zoomed-in View or Jump Mode, it is not possible to display the
Image Info Screen.

MAGNIFIED IMAGES IN IMAGE INFO SCREEN

While magnifying the image in the Image Info Screen:
• Press the
image. (Histogram will update automatically to reflect the new values.)
• Press the
button to decrease magnification or the
magnification.
• Press
to cancel magnification and view the Image Info Screen for full image.
(Press again to close the Image Info Screen.)
CAUTION !!
•
While maginifing the image in the Image Info Screen, the 4-way controller
cannot be used to change images. Press
return to full image view by pressing
change the image selection.
•
While maginifiing the image in the Image Info Screen, it is not possible to
return to the previous view even if the
the previous view, it is necessary to return to the original ratio by pressing the
button or cancel magnification by pressing the
button.
to close the Image Info Screen and return to the previous
arrows on the 4-way controller to pan to another part of the
While the Image Info Screen is displayed,
it is possible to magnify the image by
pressing the
obtain detailed histogram information for a
particular section of an image.
•
For more information on the histogram see
next section.
to cancel magnification or
, then use the 4-way controller to
button is pressed. To returning to
button. It is possible to
button to increase
button, then press the
90